News
Electric Forklift Daily Checks: Before and After Each Shift
Build a practical electric forklift inspection routine covering visual checks, function checks, charging connections and clear defect records.
Contact Us →A daily inspection helps identify changes early and gives maintenance staff a useful record. Trained operators should follow the machine manual and site procedures. Daily checks support, rather than replace, scheduled maintenance and professional repairs.
1. Start with a visual inspection
Park in the designated inspection area, lower the forks, apply the parking brake and shut down as directed by the manual. Look for cracked or distorted forks, insecure locking components, damaged tyres or wheels, and visible issues with the mast, chains and hydraulic hoses. Note fresh oil marks beneath the truck. Never use a hand to search for a pressurised hydraulic leak.
2. Confirm functions in a controlled area
Start the truck according to its operating procedure. In a safe area separated from pedestrians, check the instruments, horn, lights, steering, brakes and lift/lower functions under the conditions specified by the manual. Watch for unusual noise, vibration, changes in braking or fault messages. Remove the truck from service if a safety-related defect is found and refer it to qualified personnel.
3. Check battery and charging connections
Visually check battery restraint, connectors and cables for damage, looseness, signs of overheating or unusual odours. Use an approved charger matched to the battery and follow the designated charging procedure. Lead-acid and lithium batteries have different maintenance requirements: do not apply watering or charging practices from one type to another, or open a battery pack yourself.
4. Make defect records specific
Record the truck identification, date, operating hours, displayed fault information and the location of the issue. Compare new observations with previous records. Maintenance intervals should follow the model manual, operating hours and service conditions, rather than a single calendar interval applied to every truck.
5. Finish with correct parking and handover
Return the truck to its assigned location, lower the forks, apply the parking brake and switch off. Follow the approved charging procedure where charging is required. Use only cleaning methods allowed by the manual and avoid directing water at electrical components. Hand over unresolved defects so the next shift does not unknowingly operate a faulty truck.
Keep a checklist for each truck and define how defects are reported and when equipment is taken out of service. When requesting maintenance guidance or parts, include the model, equipment identification, operating hours and clear photographs of the issue.
View the electric forklift range · Ask about maintenance and parts
